Tractel BeamSlide

The BeamSlide sliding beam anchor is a mobile device designed for personal fall protection on structural beams. The flange widths range from 4 to 14 in. (100 to 355 mm) and flange thickness up to 1.5 in. (38 mm). The BeamSlide sliding beam anchor can be attached to the top or bottom of a structural beam. The cross bar has grooves running along its length. It contains a mobile and stationary jaw. FEATURES BeamSlide sliding beam anchor Autolocking positioning knob Steel rollers allow for smooth travel The presence of rollers allows the BeamSlide sliding beam anchor to move freely along the beam flange The jaw automatically secures its position on the cross bar The anchor can be installed on the beam flange quickly and easily The extension plate with a shackle provides a connection between the beam anchor and the shock absorber connected to the worker’s harness The use of a shock-absorbing lanyard or a retractable lanyard is mandatory It contains a mobile and stationary jaw Beam flange size 4 to 14 in. (100 to 355 mm) Flange thickness up to 1-1/2 in. (38 mm) Aluminum bar Capacity 310 lb. (140 kg), one person APPLICABLE STANDARDS   ANSI A10.32   OSHA 1926.500, subpart M1910.66, appendix C and Z359.1   Meets and/or exceeds 5,000 lb. (22.2 kN) strength requirements for anchorage point