Tractel phoenix Shock-Absorbing Lanyard - Two Arms

The Phoenix shock-absorbing lanyard is made of a 1 3⁄4 in. (45 mm) lightweight continuous web. The shock absorber is covered with a tubular polyester sleeve. The purpose of the shock absorber is to lower the impact force experienced in a fall by dissipating the kinetic energy and controlling deceleration. The shock-absorbing device is made of a specially woven webbing that ellongates through tearing on its weave and stitching. The dual arm model allows the worker to remain safely connected at all time (100% tie-off) while climbing or on the move. FEATURES   Lightweight   All shock-absorbing lanyards have a 3 ⁄4 in. (20 mm) self-locking snap hook on shock pack extremity Web is not subject to unraveling   Improved design Designed for a 6 ft (1.8 m) maximum free fall APPLICATIONS   Construction   Maintenance APPLICABLE STANDARDS   ANSI Z359.01-2007   ANSI A10.32-2012   OSHA 1926   OSHA 191 WARNING When choosing an anchorage point, take into consideration the deceleration distance. The shock absorber can elongate up to 42 in. (1.1 m) as it extends during activation. Free fall distance must never be greater than 6 ft. (1.8 m). Consult local regulations as permitted free fall distance may be less than 6 ft. (1.8 m).