Tractel Travsafe® – Horizontal lifeline system
TRAVSAFE® – HORIZONTAL LIFELINE SYSTEM The Travsafe® horizontal lifeline system provides a permanent engineered solution for fall protection needs. These permanent systems are designed and installed by Tractel® certified representatives and have custom designed solutions to meet the site-specific requirements. Travsafe® is a hands-free system that allows up to three users (maximum, if conditions allow) simultaneously. The system can be designed to allow unhindered travel for unlimited distances with out the need to disconnect and reconnect at the intermediate anchors. Every user must wear shock absorbing lanyard with maximum arrest force of 900 lb. (4 kN). The Travsafe® twin wire rope horizontal lifeline system provides smoother travel compared to single line systems. The twin wire ropes allow the traveller to sit true and move freely over the intermediate anchors, minimizing wear and eliminating user assistance. The user’s hands remain free to accomplish whatever task is required. FEATURES The twin lines ensure smooth hands-free travel over anchors and around corners When a fall occurs, the traveller’s jaws close tightly around the wires The Travsafe® system contains relatively few components when compared to other systems The system can be supplied with stainless steel anchors and stainless steel or galvanized wire rope The system can be secured to walls, floors or ceilings The system has a large tolerance for curves Anchors can be offset and travel remains smooth When properly designed and installed, the system meets all OSHA, ANSI and CSA requirements APPLICATIONS Building maintenance (rooftops without guardrails or parapets) Aircraft hangers (overhead systems to service the top of the fuselage and wings) Bridges and viaducts Oil and gas installations Distribution facilities Overhead cranes Industrial plants APPLICABLE STANDARDS OSHA 1910, subpart D: Walking and working surfaces OSHA 1926, subpart M: Fall protection ANSI Z359.6-2016: Specifications and design requirements for active fall protection systems ANSI A10.32-2012: Personal fall protection used in construction and demolition operations CSA Z259.16-21: Design of active fall protection systems For more information, please contact Tractel®.
Save time and simplify your PPE management
GearTracker PPE management software
Start a free trial Sponsored
Documentation downloads
Versions
| Name | Part number |
|---|---|
| Travsafe® – 5/16 in. (8.4 mm) single-strand galvanized steel wire rope | J27006000G |
| Travsafe® – 5/16 in. (8.4 mm) single-strand stainless steel wire rope | J27005000S |
| Travsafe® – 4 in. (100 mm) end sleeves | J300268008 |
| Travsafe® – 1 in. (25 mm) shock-absorbing sleeve | J300268009 |
| Travsafe® – 1-3/8 in. (35 mm) bi-material shock-absorbing sleeve | J300268010 |
| Travsafe® – Post corner plate | J300268015 |