Tractel Travspring® – Corner kit

Share Product TRAVSPRING® – CORNER KIT This sub-assembly is only used when the system has corners with a standard angle of 90°. Each corner kit acts as an intermediate anchor*. The kits are supplied for assembly by the installer only on internal or external 90° corners. Corner kit consists of two parts: Two corner anchors Corner tube FEATURES Material: copper-aluminum and stainless steel Net weight: 2.8 lb. (1.27 g) *    A two-arm lanyard must be used to travel past the corners. – – – – TRAVSPRING® – HORIZONTAL LIFELINE SYSTEM The Travspring® is a horizontal lifeline system that is easy to install and can allow up to three users for multiple span and two users for single span systems. These systems can be permanent or temporary and no special tools are required to install. Every user must wear shock absorbing lanyard with maximum arrest force of 900 lb. (4 kN). It comes with a visual tension indicator and a new in-line energy absorber. This is a proximity horizontal lifeline system meaning that the user must wear a double lanyard harness to leap-frog over corner anchors and manipulate the O-ring through intermediate anchors in order to traverse the length of the lifeline. As with all fall protection systems, a professional engineer or a qualified person must certify the design and installation of the lifeline. The system can be mounted on a wall or on the ground. It must not be used as an overhead system. When a fall occurs, the energy absorber deploys or un-winds acting as the visual indicator that something has happened. APPLICATIONS Construction sites Steel erection Pipe racks Concrete structures Roof work Manufacturing plants APPLICABLE STANDARDS OSHA 1910, subpart D: Walking and working surfaces OSHA 1926, subpart M: Fall protection ANSI Z359.6-2016: Specifications and design requirements for active fall protection systems ANSI A10.32-2012: Personal fall protection used in construction and demolition operations CSA Z259.16-21: Design of active fall protection systems Must be designed by a qualified person, professional engineer, as part of a complete personal fall arrest system. It can then be installed by any user.